American Polymer Standards Corporation

Providing Molecular Weight Determination Services, Polymer Standards and GPC Columns since 1983

 

American Polymer Standards Corporation is an independent contract laboratory specializing in molecular weight distribution analysis by various determination methods. Methods used are Gel Permeation Chromatography/Size Exclusion Chromatography (GPC/SEC) and Multi-Angle Laser Light Scattering (MALLS). We have extensive experience analyzing such materials as Nylon, Polyethylene Terephthalate, Polyurethane, Polyethylene, Polypropylene, Copolymers, etc...

As an independent laboratory APSC is committed to providing the highest quality characterization of your polymer samples. Our customers can be assured that as a independent laboratory confidentiality is a top priority with us. Expert witness services are also available.

APSC works closely with customers that require method development or that wish to have us perform analysis using the customers own method.

APSC offers a wide variety of organic and aqueous polymer standards. Polymer standards listed on this site are ideally suited for calibrating instruments and determining molecular weights of polymer samples by applications such as GPC/SEC, MALLS, etc. These polymer standards are only offered for research and investigational purposes and are not intended for Food, Drug, Cosmetic or Household use.

AM GPC Gel Columns are available in the solvent of your choice and are offered for a fraction of the price of other column producers. AM GPC Gel Columns are made of highly cross-linked ST-DVB copolymer for use with most organic solvents (e.g. DMF, NMP, DMSO, HFIP, THF, TCB etc...).

APSC offers the service of regenerating your old columns for a fraction of the cost of replacing them. In most cases we can have your columns regenerated and shipped back within 7 business days. Every regenerated column meets or exceeds new column specifications. All columns are shipped in the solvent of your choice.

 

We Accept Visa, MasterCard & American Express

 

 

Hydroxypropyl Cellulose

Catalog # Mp Mw Mn IV* (dl/gm) Price/Qty.
HPC50K 49,000 55,700 28,800 1895 $200.00/250mg
HPC35K 34,000 37,500 21,900 1.285 $200.00/250mg
HPC30K 30,000 32,400 18,800 1.095 $200.00/250mg
HPC25K 26,750 29,500 17,900 0.975 $200.00/250mg
HPC20K 18,700 20,500 12,700 0.630 $200.00/250mg
HPC15K 15,250 17,000 10,400 0.530 $200.00/250mg
HPC10K 11,200 12,000 7,200 0.370 $200.00/250mg
MSDS   BACK

 

Broad MWD
Catalog # Mw Mn IV* (dl/gm) Price/Qty.
BHPC865K 865,000 190,000 12.780 $200.00/1.0g
BHPC637K 637,000 105,500 9.464 $200.00/1.0g
BHPC570K 570,000 145,500 7.990 $200.00/1.0g
BHPC557K 557,500 125,000 9.039 $200.00/1.0g
BHPC486K 486,900 110,000 7.479 $200.00/1.0g
BHPC388K 388,900 95,000 5.422 $200.00/1.0g
BHPC290K 288,200 38,700 2.930 $200.00/1.0g
BHPC205K 205,600 62,500 3.348 $200.00/1.0g
BHPC188K 187,600 38,900 2.750 $200.00/1.0g
BHPC153K 153,500 48,200 3.432 $200.00/1.0g
BHPC93K 93,000 39,600 2.325 $200.00/1.0g
BHPC86K 86,300 34,900 2.450 $200.00/1.0g
BHPC80K 81,500 14,700 1.725 $200.00/1.0g
BHPC72K 71,800 29,000 1.898 $200.00/1.0g
BHPC70K 69,900 29,800 1.191 $200.00/1.0g
BHPC57K 56,900 28,900 1.890 $200.00/1.0g
BHPC55K 56,200 11,100 1.245 $200.00/1.0g
BHPC50K 50,500 24,600 1.495 $200.00/1.0g
BHPC30K 31,600 16,500 0.810 $200.00/1.0g
MSDS   BACK

 

Hydroxypropyl Cellulose Kits
Catalog # Kit Description Kit Price
HPCKIT 250mg of HPC10K - HPC50K $1,200.00
BHPCKIT 1.0g of BHPC30K - BHPC865K $3,600.00

IV* - Intrinsic Viscosity in 0.05M Sodium Sulfate; pH = 7.0 at 30°C

Conventional GPC Analysis

Information included in final report: Formal report with the Mn, Mw, Mz and MWD relative to available standards, calibration curve, one MWD chromatogram per sample, one DRI chromatogram and one data summary report per sample injection.
Three injections are taken for each sample.

Normal turnaround time is 7 business days from the time we receive the sample.

Express service is available at a 50% surcharge and results available in 48 hours.

Solvent First Sample *Additional Sample(s)
THF $424.00 $363.00
Toluene $545.00 $424.00
Chloroform $545.00 $424.00
Methylene Chloride $545.00 $424.00
Methanol $545.00 $424.00
Water $545.00 $424.00
DMF $665.00 $424.00
DMAC $665.00 $424.00
NMP $665.00 $424.00
DMSO $665.00 $424.00
TCB $787.00 $605.00
HFIP $1,150.00 $787.00

*Additional Sample(s) pricing is for samples received for analysis at the same time and using the same operating conditions.

Recalculation or Additional Calculations of Data: $100.00

Additional Chromatograms; including overlays: $25.00

Any requests for additional information after 2 weeks of receiving the final report will be charged at a rate of $100.00 per hour.

Sample Submission Form

 

 

Multi - Angle Laser Light Scattering (MALLS)

Determining the weight average molecular weight (Mw)of organic and water soluble polymers by MALLS is done by injecting the solution into a chromatography system with a MALLS instrument and a refractometer. The intensity of the scattered light is proportional to the molecular weight. The weight average can be calculated using a known dn.dc value, a specific refractive index increment of the solute-solvent mixture and a known concentration.

Instrumentation: Wyatt Dawn
Molecular Weight Range:

Organic Solvent (Above 10,000 g/mol)
Aqueous Solvent (Above 10,000 g/mol)

Temperature: Room Temperature
Turnaround Time: 7 Business Days from Receipt of sample(s)
Price: $1,815.00 - First Sample
$1,210.00 - *Additional Sample(s)

*Additional Sample(s) pricing based on samples received at the same time using the same operating conditions.

Sample Submission Form

 

AM GPC Gel Columns

For your convenience and to eliminate the costly and time consuming solvent changovers, columns are shipped in the solvent of your choice. Columns are provided in three particle sizes (5, 10 and 15 microns) and can be bought in pore sizes of 100Å, 500Å, 103Å, 104Å, 105Å, 106Å and Linear (mixed bed). Each column is individually tested for efficiency and resolution and is unconditionally guaranteed for 120 days. Please specify the particle size desired (5, 10 or 15 micron) and the solvent you wish the column to be shipped in.

5 micron
Catalog # Pore Size Mw Range Price
AM Gel 100/5 100Å 0 - 700 $968.00
AM Gel 500/5 500Å 0 - 10,000 $968.00
AM Gel 103/5 1,000Å 1,000 - 20,000 $968.00
AM Gel 104/5 10,000Å 10,000 - 200,000 $968.00
AM Gel 105/5 100,000Å 100,000 - 2,000,000 $968.00
AM Gel 106/5 1,000,000Å 500,000 - 10,000,000 $968.00
AM Gel Linear/5 Mixed Bed 1,000 - 5,000,000 $1,089.00

 

10 micron
Catalog # Pore Size Mw Range Price
AM Gel 100/10 100Å 0 - 700 $847.00
AM Gel 500/10 500Å 0 - 10,000 $847.00
AM Gel 103/10 1,000Å 1,000 - 20,000 $847.00
AM Gel 104/10 10,000Å 10,000 - 200,000 $847.00
AM Gel 105/10 100,000Å 100,000 - 2,000,000 $847.00
AM Gel 106/10 1,000,000Å 500,000 - 10,000,000 $847.00
AM Gel Linear/10 Mixed Bed 1,000 - 5,000,000 $968.00

 

15 micron
Catalog # Pore Size Mw Range Price
AM Gel 100/15 100Å 0 - 700 $726.00
AM Gel 500/15 500Å 0 - 10,000 $726.00
AM Gel 103/15 1,000Å 1,000 - 20,000 $726.00
AM Gel 104/15 10,000Å 10,000 - 200,000 $726.00
AM Gel 105/15 100,000Å 100,000 - 2,000,000 $726.00
AM Gel 106/15 1,000,000Å 500,000 - 10,000,000 $726.00
AM Gel Linear/15 Mixed Bed 1,000 - 5,000,000 $847.00

 

Guard Column
Catalog # Price
AM Gel Guard Column $275.00

Guard columns protect the main bank of GPC columns from adverse conditions and are available in all solvents and particle sizes

 

 

GPC Column Regeneration Service

Column Type Price Guarantee
microSTYRAGEL™ (10µ & 15µ column; pore sizes 100Å - 106Å) $363.00 120 Days
microSTYRAGEL™ (10µ & 15µ columns; Mixed Bed) $394.00 120 Days
ULTRASTYRAGEL™ (5µ columns with pore sizes 100Å - 106Å) $484.00 90 Days
ULTRASTYRAGEL™ (5µ columns; Mixed Bed) $515.00 90 Days

Note: Please put end caps on your columns when shipping them for regeneration service. All columns recieved for regeneration service. All columns recieved for regeneration service without end caps will be charged an additional $20.00 per end cap that needs to be provided.

 

Regeneration Procedure
1. GPC column tube and end caps are cleaned.
2. New GPC gel in prepared.
3. Inlet and outlet filters are replaced.
4. Column is repacked using the propietary slurry method.
5. Column is tested for efficiency and performance.
6. Column is shipped in the solvent of your choice.
7. Each column is unconditionally guaranteed.
8. Each column meets or exceeds new column specifications.

 

Organic GPC Standards

Polystyrene Polyethylene Terephthalate
Polymethyl Methacrylate Polybutylene Terephthalate
Polybutadiene Polytetrohydrofuran
Poly(Iso-Butylene) Cellulose Acetate
Polycarbonate Cellulose Triacetate
Polypropylene Glycol Nylon 6
Polyvinyl Acetate Nylon 6/6
Polyvinyl Chloride Polyacrylonitrile
Polyvinyl Butyral Vinylidene Fluoride-hexafluoropropylene
Polydimethylsiloxane Polysulfone
Polypropylene Polylactic Acid
Polyethylene Polyisoprene

 

Aqueous GPC Standards

Polyacrylic Acid - Na Salt Polyvinyl Alcohol
Polymethacrylic Acid - Na Salt Hydroxypropyl Cellulose
Polyacrylamide Hydroxypropyl Methylcellulose
Polyethylene Glycol Carboxymethyl Cellulose - Na Salt
Polyethylene Oxide Poly (2-Vinylpyrlidine)
Polystyrene Sulfonate - Na Salt Polyvinylpyrrolidone
Dextran Poly(allylamine) Hydrochloride
Hydroxyethyl Starch Chitosan
Hydroxyethyl Cellulose Xanthan
Pullulan Guar Gum

 

Contact Us

Please Allow 48 Hours For Response

Title
First Name A value is required.
Last Name A value is required.
Company A value is required.
Address A value is required.
City A value is required.
State Please select an item.
Country Please select an item.
Postal/Zip Code A value is required.Minimum number of characters not met.Exceeded maximum number of characters.
Phone A value is required.Minimum number of characters not met.Exceeded maximum number of characters.
Fax
Email A value is required.Invalid format.
Comments

 

American Polymer Standards Corporation * 8680 Tyler Blvd. * Mentor, OH 44060 * USA * Phone: 440-255-2211 * Fax: 440-255-8397